Jump to content


Recommended Posts

Posted

Hi All

Ive just had Kwik Fit do a complete wheel alignment tracking and tyre balance on my XF. As it was when it went in when the steering wheel is straight the car steers to the left. I took it back and they did it again and its no better. Any ideas ?

 

Colin

Posted

Welcome to the club, Colin.

 

The only thing I can think of is that the steering wheel needs aligning with the wheels.

 

I had the same issue with a Rover, where the wheels were perfectly aligned but the steering wheel was a bit out.

 

Regards,

 

Peter.

  • 2 months later...
Posted

Hi Colin, 

 

I believe that the correct method to align the front wheels is to centre the steering wheel first and align each front wheel whilst the steering wheel is in the straight ahead position. Using this method the steering wheel will be centred with the car travelling in a straight line. Some people may be tempted to remove the steering wheel and reset to the centre position but this interferes with the indicator cancelling position so that it cancels quickly in one direction and much slower (greater rotational angle) in the other. Hope this helps

  • 1 year later...
Posted

Had wheel alignment done on my xf by several different garages with only one doing it right. From what I have seen I agree steering wheel should be centred before alignment is done. Use a garage with the latest laser equipment and make sure your tyres are evenly worned or replaced and suspension is not worn either.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...





×
×
  • Create New...



Forums


News


Membership


  • Insurance
  • Support