Jump to content


Recommended Posts

Posted

When I bought the car the heater valve had taken out the CCU so changed those and didn't bother with much else as it was cold. Today due to the warm weather I had it regassed but it didn't work. The guys hooked it up and the car gave 9 climate faults and 6 engine faults. After clearing the faults down only one climate fault remains B2516 Blower Motor Control Circuit Failure. The ECU Faults remaining are:

P0533 Air Con Pressure Sensor A Circuit High

P1260 Security Input

P1582 Flight recorder date is stored

B0300 Network Management Expulsion

B1316 Boot/Trunk Latch Power Close Unit

P1111 System Deck Complete (I think)

Its only fair to highlight that I have the Fibre optic cable out of the boot at the moment, so voice, nav, cdc and phone are not connected.

I am assuming that I need to get a pressure sensor "a" and repair the blower motor (which is odd as it seems to operate at all speeds)?

Your informed thoughts are appreciated.

Matt

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...





×
×
  • Create New...



Forums


News


Membership


  • Insurance
  • Support