Jump to content


Recommended Posts

Posted

Hi Guys

The wheel on my 2004 2.5 S Type is scuffed and scruffy. I would like one of those wood/leather ones from a newer model. How do I get the old one off and will the new type fit? I only have the horn push on the current wheel

Rgds

Ed

Posted

First of all, make sure you have your radio code to hand then disconnect the battery and go have a cuppa for 1/2 an hour. 

Feel behind the wheel and you should find the holes that house the bolts holding the airbag on.

undo these, their most likely torx headed bolts.

onclip the airbag wire and any wires that need unclipping. 

Undo the nut holding the wheel on but leave it on a few turns. (Don't take it off completely then yank on the wheel or you'll get a face full of wheel and it hurts!! Trust me, I know!)

with your palms strike hard from the back of the wheel until it comes loose.

now you can remove the nut and the wheel.

the new one from a later facelift will fit, even an early XF wheel will fit although I think the wiring may be different, not sure on that. 

Refitment is the reverse of the above. 

 

Good luck.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...





×
×
  • Create New...



Forums


News


Membership


  • Insurance
  • Support