Jump to content


Recommended Posts

Posted

As per title. The noise is connected with rotation only. There are no knocks or clunks (so not CV, by my understanding). It gets faster as I go faster, and so it would seem like bearings, the shafts, or the wheel.

I'm sure it is not connected to the brakes as discs and pads were renewed as needed, but that didn't solve it.

After lifting the corner in the air, no matter what brutality i used, the wheel refused to wobble, so i assume that means the wheel bearings are OK.

Not sure what to think. Are there shaft bearings, and might they need replacing? How can I test? There is a big ring, similar in appearance to an external bearing, but spinning the wheel when stood beneath it does not hint that is problem, and I am loathe to put a brick on the accelerator then climb under.

Any suggestions please?

Posted

Hi Kev --You didn't really say if the noise was still there when you spun the wheel of the ground  ???

because I'm thinking it could perhaps be something in the tyre or a bulge in the tread ---????

  • 2 weeks later...
Posted

hi, It maybe driveshaft. my 2.2 auto estate was terrible. after ringing for hours, factors etc discovered these people,

CPS DRIVELINK, Gateshead to recon it (jaguar only £900) for £175 posted back. If it is that.  better than secondhand.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...





×
×
  • Create New...



Forums


News


Membership


  • Insurance
  • Support