Jump to content


Recommended Posts

Posted

Jaguar XJ8 Executive Enhancement Detail

Products and equipment used

Uber microfiber towels

Chemical guy’s woolly mammoth drying towel

3m yellow pads 150mm 75 mm

3m Green pads 150mm 75mm

140 mm glazing pads

Halogen site lights

Makita rotary polisher

DA Polisher

Scholl s17+

Scholl s3 gold

Prima Amigo

Swissvax Shield

Carpro eraser

3m masking tape

Meguiars APC

Costco microfibre towels

Meguiars hyper dressing

Valet pro citrus bling

Valet Pro PH neutral Snowfoam

Valet pro tyre dressing

Valet Pro Bilberry

AMDetails AMbubbles

Bilt Hamber clay bar

Autosmart Tardis

Various brushes

Kranzle pressure washer

Carpro Sheepskin wash mitt

Carpro Dlux

Noodle wash mitt

Carpro Lambs wool wash mitt

Poorboys microfibre clothes

Uber buffing clothes

Autobrite Snow foam gun

Chemical guys Jetseal 109

Autobrite Repel

Auto Finesse Mecury Metal polish

00 grade wire wool

The car was then given its first coat of snow foam whilst this was dwelling I went round the car using APC in a foaming head bottle cleaning the fuel filler area and various gaps and grills. The snowfoam was then blasted off with the pressure washer, and then the car was given another coat of the same mix snowfoam and the car was washed using the 2 bucket method with grit guards in both buckets and a Carpro lambswool wash mitt.

The car was then rinsed off using an open ended hose and I then went round the car with Tardis which was left to go to work before being wiped down with microfibre clothes. The car was then given a coat of Ironx again left to do its stuff before the car was washed doing using the pressure washer.

The car was clayed using citrus bling and water mix (10 to 1) and a Bilt hamber soft clay bar which helped to pull more contaminates from the paint work it was then rewashed using the same method and dried using the woolly mammoth.

The arches where next and they where sprayed with APC and cleaned using various brushes and a noodle wash mitt. They where then sprayed with Tardis which was left do its stuff whilst I moved onto the next arch before going back and being wiped down with a microfibre cloth. The engine bay was sprayed with APC and left do dwell before being given a tickle with a soft detailing brush before being rinsed with the pressure washer and dressed with Megs Hyper dressing.

IMG_7523.jpg

IMG_7524.jpg

IMG_7525.jpg

IMG_7526.jpg

IMG_7527.jpg

IMG_7533.jpg

IMG_7528.jpg

IMG_7529.jpg

IMG_7530.jpg

IMG_7531.jpg

Posted

IMG_7532.jpg

A few shots using my site lights I then taped the car up and went round with various yellow 3m pads and Scholl s17+ polish some panels required the use of S3 Gold on green 3m pads after polishing each panel was given a wipe down with Carpro eraser after polishing to check finish and remove any polishing oils.

I then went round the car and applied a coat of Prima Amigo using the DA and the lake county pad which was left before being buffed using Uber buffing towels.

IMG_7534.jpg

IMG_7535.jpg

IMG_7536.jpg

IMG_7538.jpg

IMG_7539.jpg

IMG_7540.jpg

IMG_7542.jpg

IMG_7543.jpg

IMG_7545.jpg

Posted

IMG_7562.jpg

IMG_7563.jpg

The car was given 2 coats of the Swissvax Shield wax leaving wax to bond for 30min and approx 60min between each coat again buffed using Uber buffing towels.

The plastic trim was dressed using Carpro Dlux which is a cracking product which a little goes a long way and gives a stunning finish.

After this I cleaned the glass and gave them all 2 coats of Autobrite repel and also gave the arches coat of hyper dressing and dressed the tyres using the Valet pro tyre dressing. alloys sealed using 2 coats of Chemical guys Jetseal 109

Exhaust’s where cleaned up using Auto Finesse metal polish and 00 grade wire wool

IMG_7565.jpg

IMG_7566.jpg

IMG_7567.jpg

IMG_7568.jpg

IMG_7569.jpg

IMG_7581.jpg

IMG_7584.jpg

IMG_7585.jpg


  • 4 months later...
Posted

Outstanding work on the XJ but you don't mention how long or how much, could you enlighten me?

 

Best regards,

Dave

  • Like 1

Posted

Outstanding work on the XJ but you don't mention how long or how much, could you enlighten me?

 

Best regards,

Dave

 

Hi Dave, price depends on level of correction required by owner and condition of the paint work. All forum members get a 10% discount on work carried out

Posted

Hi Dave, price depends on level of correction required by owner and condition of the paint work. All forum members get a 10% discount on work carried out

 

Thanks for the response, but as an example could you tell us how long it took for the XJ?  And ball-park price?

 

I do appreciate there is hell of a lot of work put into the XJ and the results are very evident - it's a stunning before and after comparison.

 

Best regards,

Dave

Posted

Thanks for the response, but as an example could you tell us how long it took for the XJ?  And ball-park price?

 

I do appreciate there is hell of a lot of work put into the XJ and the results are very evident - it's a stunning before and after comparison.

 

Best regards,

Dave

Spent about 20hrs on this car, approx cost was £220 for this level of work

  • 3 years later...
Posted

Hi ive got a salsa red xfr and i would like you to get the paintwork to its former glory,could you message me with your details please


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...





×
×
  • Create New...



Forums


News


Membership


  • Insurance
  • Support