Jump to content


Recommended Posts

Posted

Hi AlI I had my 2.7d XS 2007 serviced today but the mechanic could not reset the service required message on the dash board. He got to the second stage but it would not reset. Has anybody got any suggestions on what I can do to reset it.

Posted

Hi Mark,

 

I have listed a procedure, probably the same one that your mechanic used.

However, the trick to the reset procedure is to carry out each stage within a second or two for it to work.

Here goes....

  • Insert key into the ignition 
  • Hold reset (located on the right hand side of the steering column)
  • Turn on ignition so fascia lights up
  • let go of reset/clear
  • hold trip (on the end of the stalk)
  • hold reset/clear
  • display should now indicate "resetting service mode" keep hold of buttons until...
  • display now indicates "service mode reset"

 

Hope this info helps?

 

Regards,   Trevor

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...





×
×
  • Create New...



Forums


News


Membership


  • Insurance
  • Support