Jump to content


Recommended Posts

Posted

Hi everyone I'm new here as just got myself a 2003 X Type with only 50k on the clock and love it.

 

But I have a problem, I have now had 3 new bulbs in the off side (drivers side) Dip Headlight as they keep blowing after about 2-3 weeks and I have managed to change this without taking the bumper off whoop whoop.

 

Any Ideas what could be causing this, any help would be gratefully accepted.

 

Thanks


Posted

You could try this;

 

Excessive Bulb temperature is a more likely cause of failure. This will occur if the heat transfer path from Bulb to the light unit and thence
atmosphere, is less than adequate. Good, clean metallic contact between the bulb's metal seat and its holder is essential.

 

Cheap quality bulbs may not fit as well as the more high end versions, or there might be corrosion. Some heat is lost throught the supply and earth wires themselves, so in this respect a bad earth or connector can assist in the failure process. So check the full path for heat to escape - not easy in the X Type which is probably why it is seldom done! In some cases, better heat loss might be achieved by using heat transfer compound on the Bulb base.(Intended to assist the heat transfer from elecronic components to their heat sinks (Maplins - Code RE96E for £4.19)

 

ATB.

 

Trevor

Posted

Thanks Trevor, I have some of that compound and will give it a go but first I may just take the bumper off and take the light out and clean it up first and the use the compound.

 

Cheers.

Posted

Hi Kelly....and welcome to the club !

 

Always make sure that you don't handle the glass when fitting it as the Oil from your skin will create a hotspot on the Bulb and as Trevor has said, excessive heat transfer is a killer for bulbs

If you do touch it accidentally, clean it with an alcohol based cleaner and that should do the job.

 

Good luck   Trevor (another one)

  • Like 1

  • 2 months later...
Posted

OK folks can now say the Compound around the Bulb base worked it's been 3 months now without blowing (touch wood)

Thanks again

  :)

  • Like 1

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...





×
×
  • Create New...



Forums


News


Membership


  • Insurance
  • Support