Leaderboard

For those of you that may what to find out the answer to my question. I asked Hilton Camons, he does the XF video's on you tube. This was his reply: Thanks for reaching out You can swap the tail lights out for the pre-facelift tail lights, but the indicator and brake light wires will need switching around on your OEM plug for the indicator to work. Honestly, if I were you, I’d just replace the whole light with a salvage one. They don’t often fail. The older units used to have LED’s in the tail light section that would fail due to condensation oxidising the LED board, so I wouldn’t go for the older units if I were you. The newer ones were far more reliable. Best wishes, Hilton

hi think all the diesels are belt driven for timing and fuel pump, 2 seperate belts cheers Joe

PaulT. So, press start/stop without using the brake pedal to turn the ignition on. When the screen shows its home menu, Press the Navigation screen button. Press destination entry. Press and hold the colon after the word “entry”, at the top of the screen till the screen changes, to two columns of buttons. Press “parts information” top of left column, the screen will change again. At the bottom there will be 3 groups of 2 digits. The middle two are the year of the mapping info. Ignore the back button. It only goes back to the two column screen, if you have had a look at the other options. To get out of this “hidden” menu/info, you lock the car, wait approx a minute, unlock car and start the engine system boots up normally. My XF is a ‘14 yr model, made in ‘13, which I bought in ‘19, it still had the ‘13 mapping loaded. Hope that helps.