Poi man

I got my update from navigation.com/jaguar. For XF 2011 (face lift model) you must select XF 2012 (gen2.1 USB)

I had a 1999 s-type that sprung a air con leak, it was on the fatter pipe in the engine bay left side as you look in about mid way. There is a bolt head that touches the insulation there, it wore the insulation and into the aluminum pipe.

Hi all I have the 2011 XF(UK 61 plate) however this is one of the first face lifted models. I can confirm this model uses the usb update and not the DVD type. navigation.com/jaguar advises that the 2011 XF is the DVD type but they do not take into account that there are face lifted models in late 2011. Usb update took me 2.3 hours with no problems.

If you have an XF 2012-on (face lift) with a centre speaker rattle, here is how to sort it for good. 1) use a butter knife or blunt knife to slide under one side of the centre speaker cover. 2) give the cover a pull straight upwards and it will pop out of its location but not more than 40mm as there is a wire connector attached to the cover. 3) push the small tap in on the plugs long side and slide the plug out. 4) make sure you have the four steel clips still attached to the cover as they may drop off. Give them a push and seat them all the way back on the plastic lugs on the under side of the cover. 5) at this point you can see witness marks where the cover touched the dashboard. 6) run a small bead of silicon (clear is best) on all the contact points. Keep the silicone about 6mm from the edge as once the cover clicks back in the silicone will spread near the edge( you don't want it all oozing out ) 7) blob some silicone on the clips on the underside of the cover to stop them rattling. 8) plug the connector back in and re-fit the cover hooking the back end in first(side nearest to the windscreen) 9) never again will this dam thing rattle! OK now the bonus, if you like your music loud (like me) you probably turn your music up until just before it distorts, well guess what it wasn't your speakers distorting it was the cover!!!

If you have an XF 2012-on (face lift) with a centre speaker rattle, here is how to sort it for good. 1) use a butter knife or blunt knife to slide under one side of the centre speaker cover. 2) give the cover a pull straight upwards and it will pop out of its location but not more than 40mm as there is a wire connector attached to the cover. 3) push the small tap in on the plugs long side and slide the plug out. 4) make sure you have the four steel clips still attached to the cover as they may drop off. Give them a push and seat them all the way back on the plastic lugs on the under side of the cover. 5) at this point you can see witness marks where the cover touched the dashboard. 6) run a small bead of silicon (clear is best) on all the contact points. Keep the silicone about 6mm from the edge as once the cover clicks back in the silicone will spread near the edge( you don't want it all oozing out ) 7) blob some silicone on the clips on the underside of the cover to stop them rattling. 8) plug the connector back in and re-fit the cover hooking the back end in first(side nearest to the windscreen) 9) never again will this dam thing rattle! OK now the bonus, if you like your music loud (like me) you probably turn your music up until just before it distorts, well guess what it wasn't your speakers distorting it was the cover!!!